全自动超声波清洗机的功能很是强大，它在工作的时候水温是会缓慢的上升的，这个时候就会有人在想，这温度都可以自己上升了，为什么还要加入加热功能呢？

　　The function of automatic ultrasonic cleaning machine is very powerful, it is working when the water temperature will slowly rise, this time there will be someone thinking, this temperature can rise, why to add heating function?

　　全自动超声波清洗机的加热功能的目的是为了提高清洗效果，加热方式显着提高了清洗效果。通常使用超声波清洗时，使用的工作温度为50℃～60℃。由于温度为50-60摄氏度，大多数活性酶活性较强，是污渍分解的适宜温度范围。所以如果需要去油，一定要选择有温度调节功能的全自动超声波清洗机。

　　The purpose of the heating function of the automatic ultrasonic cleaning machine is to improve the cleaning effect, and the heating method significantly improves the cleaning effect. Usually when using ultrasonic cleaning, the working temperature is 50℃ ~ 60℃. Due to the temperature of 50-60 degrees Celsius, most of the active enzyme activity is strong, is the suitable temperature range of stain decomposition. So if you need to oil, be sure to choose the automatic ultrasonic cleaning machine with temperature regulation function.

　　全自动超声波清洗机工作时水温确实会慢慢升高，但热量确实很小，全自动超声波清洗机越小，这种现象越明显，因为清洗机的容量越小，在同样的热量下，水温越容易上升。温升的原因一是换能器和内部电路板工作时会发热，由于热量倾向于向上移动，因此大部分热量被传递到水槽。二是空化效应。空化效应产生大量微小气泡，这些气泡膨胀然后破裂，释放出大量能量，同时也产生一定的温度。

　　Automatic ultrasonic cleaning machine does work when the water temperature will slowly rise, but the heat is really very small, automatic ultrasonic cleaning machine is smaller, this phenomenon is more obvious, because the capacity of the cleaning machine is smaller, under the same heat, the water temperature is easier to rise. One reason for the temperature rise is that the transducer and the internal circuit board get hot when they work, and since the heat tends to move upwards, most of it is transferred to the tank. The second is cavitation effect. Cavitation creates lots of tiny bubbles that expand and then burst, releasing a lot of energy as well as a certain temperature.

　　超声波工作时的自然升温速度很慢，全自动超声波清洗机的体积越大，升温速度越慢。一般大型全自动超声波清洗机都设计有冷却系统，以确保长期功能。内部电路的大部分温度都已消散。其次，体积大，水本身的比热容比较高，所以加热比较困难。因此设计了加热功能，以及温度控制系统。

　　The natural heating rate of ultrasonic work is very slow, the larger the volume of automatic ultrasonic cleaning machine, the slower the heating rate. General large automatic ultrasonic cleaning machine are designed with cooling system, to ensure long-term function. Most of the heat in the internal circuit has dissipated. Secondly, because of its large volume, the specific heat capacity of water itself is relatively high, so heating is more difficult. Therefore, the heating function and temperature control system are designed.

　　关于全自动超声波清洗机的使用需要有加热功能的内容就讲解到这里了，如果您在购买或者使用清洗机时有问题，可以通过网站www.jnthcsb.com来联系到我们，咨询相关。

　　About the use of automatic ultrasonic cleaning machine need to have heating function content is explained here, if you have a problem in the purchase or use of cleaning machine, you can contact us through the website www.jnthcsb.com, consultation related.