喷淋清洗机常出现的使用问题就是出水压力很低或无压力的情况，此种情况下，要及时检修设备的故障。那么喷淋清洗机出现压力过低的问题该如何？

　　The use of spray cleaning machine is often the problem of water pressure is very low or no pressure, in this case, to timely repair the fault of the equipment. So how to solve the problem of low pressure of spray cleaning machine?

　　喷淋清洗机通常用于冲洗过滤液压系统在制造、组装、使用和维护过程中产生或侵入的污染物；还可用于工作油的定期维护和过滤，以提高清洁度，避免或减少污染造成的故障，从而确保液压系统设备的高性能、高可靠性和长寿命。

　　Spray cleaning machine is usually used to flush the pollutants generated or intruded into the filtration hydraulic system during manufacturing, assembly, use and maintenance; It can also be used for regular maintenance and filtration of working oil to improve cleanliness and avoid or reduce failures caused by pollution, thus ensuring high performance, high reliability and long life of hydraulic system equipment.

　　如果喷淋清洗机在使用后关闭，则没有沸水、喷枪和管道水和压力。释放压力的方法是开枪，然后从管道中排水。检查喷嘴是否磨损；如果磨损，请更换喷嘴；过滤器是否堵塞，清洗物品更换过滤器；拆下喷淋清洗机喷嘴，启动机器，检查喷枪喷水是否正常。如果水正常，重新安装喷嘴，检查机器是否有压力。如果仍然没有压力，则表明调压阀损坏或喷淋泵密封损坏。

　　If the spray cleaner is turned off after use, there is no boiling water, spray gun and pipe water and pressure. The pressure is released by firing a gun and draining it from the pipe. First check whether the nozzle is worn; If worn, please replace the nozzle; Whether the filter is blocked, clean the item to replace the filter; Remove the nozzle of spray cleaning machine, start the machine, check whether the spray gun is normal. If the water is normal, reinstall the nozzle and check the machine for pressure. If there is still no pressure, it indicates that the regulating valve is damaged or the spray pump seal is damaged.

　　喷淋清洗机压力不足的原因及处理方法：

　　Reasons and treatment of insufficient pressure of spray cleaning machine:

　　喷淋喷淋清洗机喷淋喷嘴磨损严重。喷淋喷嘴过度磨损会影响设备水压，应及时更换新喷嘴。接入装置的流入流量不足，导致水流量和输出压力不足。应及时提供足够的流入流量，以出口压力较低的问题。如果清水进口过滤器中有空气，喷淋清洁器应排出清水进口过滤器中的空气，以确保输出标准出口压力。

　　Spray spray cleaning machine spray nozzle wear serious. Excessive wear of the spray nozzle will affect the water pressure of the equipment, so the new nozzle should be replaced in time. The inflow flow of access device is insufficient, resulting in insufficient water flow and output pressure. Adequate inflow flow should be provided in a timely manner to address the problem of low outlet pressure. If there is air in the clean water inlet filter, the spray cleaner shall discharge the air from the clean water inlet filter to ensure the output standard outlet pressure.

　　总之，一般从正规渠道购买的喷淋清洗机质量都是很好的，但这也避免不了它在使用过程中会出现一些问题，所以我们需要做好预防工作，更多内容就来这里www.jnthcsb.com咨询吧。

　　In short, the quality of the spray cleaning machine bought from formal channels is very good, but this can not avoid it in the process of using some problems, so we need to do a good job of prevention, more content to come here www.jnthcsb.com consultation.