全自动超声波清洗机如今在各行各业都有所使用，但有用户也反映，近来该清洗机的清洗效果不怎么好，这是什么原因造成的呢？

　　Automatic ultrasonic cleaning machine is now used in all walks of life, but there are users also reflect that the cleaning effect of the cleaning machine is not good recently, what is the reason for this?

　　全自动超声波清洗机的清洗槽内清洗液液位欠好，这会导致清洗不抱负，需求调整清洗机液位来改善清洗作用。超声波频率和谐没有调好就会形成超声波清洗机清洗不抱负，需求重新调整。

　　The cleaning liquid level in the cleaning tank of the automatic ultrasonic cleaning machine is not good, which will lead to poor cleaning. The level of the cleaning machine needs to be adjusted to improve the cleaning effect. Ultrasonic frequency harmony is not adjusted well, it will form the ultrasonic cleaning machine cleaning ambition, the need to readjust.

　　假如清洗槽内液体温度过高，也会导致清洗不抱负，因此要控制好清洗液温度。清洗液选用不妥也是形成超声波清洗机清洗不抱负的原因之一，需求挑选合适的清洗液。

　　If the temperature of the liquid in the cleaning tank is too high, it will also lead to the cleaning ambition, so it is necessary to control the temperature of the cleaning liquid. Improper selection of cleaning liquid is also one of the reasons for the formation of ultrasonic cleaning machine cleaning ambition, the need to choose the right cleaning liquid.

　　调节超声功率旋钮，提高超声功率。无法达到目的可咨询工程师。调整液位至很好的高度，不懂好的位置可咨询客服。调整温控器的设定值至适宜温度，不懂适宜温度可咨询业务经理了解。机器停止工作，关闭电源；待洗清夜降温后，更换正确的清洗液。

　　Adjust the ultrasonic power knob to improve the ultrasonic power. If this is not possible, consult an engineer. Adjust the liquid level to the best height, do not know the best position can consult customer service. Adjust the setting value of the thermostat to the appropriate temperature. If you do not know the appropriate temperature, consult the business manager. The machine stops working and turns off the power; Change the correct cleaning solution after the temperature drops overnight.

　　超声波的高速震荡能够对清洗物品的外表进行清洁和灭菌，空化效应显着，清洁效率也显着高于人工清洗，而且不会有清洁死角和损坏。但这些作用都是建立在正确的操作过程和合理有用的生产环境下。因此，为了到达更好的清洁作用，操作人员需求注意一些操作事项。

　　Ultrasonic high-speed shock can clean and sterilize the surface of the cleaning items, cavitation effect is significant, cleaning efficiency is also significantly higher than manual cleaning, and there will be no cleaning dead Angle and damage. But these functions are established in the correct operation process and reasonable and useful production environment. Therefore, in order to achieve a better cleaning effect, operators need to pay attention to some operational matters.

　　全自动超声波清洗机清洗效果不好怎么造成的？以上便是原因以及解决方法，假如出现清洗效果不好时就要快速处理，不影响设备的工作效率。更多布内容可以来网站www.jnthcsb.com咨询。

　　Automatic ultrasonic cleaning machine cleaning effect is not good how to cause? The above are the reasons and solutions. If the cleaning effect is not good, it is necessary to deal with it quickly, without affecting the working efficiency of the equipment. For more information, please visit www.jnthcsb.com.