喷淋清洗机在制造业中以多种形式出现，应用范围广泛。在脱脂清洗的应用中，还与超声波清洗相结合，形成清洗烘干线。在超声波除蜡的清洗过程中，一般用作漂洗工艺段，以降低成本，达到效果。

Spray cleaning machine appears in many forms in the manufacturing industry and has a wide range of applications. In the application of degreasing cleaning, it is also combined with ultrasonic cleaning to form a cleaning and drying line. In the cleaning process of ultrasonic wax removal, it is generally used as the rinsing process section to reduce the cost and achieve the effect.

喷淋清洗机对钢带表面不溶于水的固体污垢的去除依赖于表面活性剂的分散。离子型表面活性剂可以吸附在固体颗粒表面，使所有颗粒带上相同的电荷，从而相互排斥、分散。此时，表面活性剂的亲油基团排列在固体颗粒表面，亲水基团面向水。

The removal of water-insoluble solid dirt on the surface of steel strip by spray cleaning machine depends on the dispersion of surfactant. Ionic surfactants can be adsorbed on the surface of solid particles to make all particles have the same charge, so as to repel and disperse each other. At this time, the lipophilic groups of the surfactant are arranged on the surface of the solid particles, and the hydrophilic groups face water.

这样，清洗液与固体颗粒之间的界面张力也可以小于颗粒之间的内聚力，防止颗粒再次团聚在一起。使用全自动喷淋清洗机时，双手必须牢牢握住高压清洗机头。

In this way, the interfacial tension between the cleaning solution and the solid particles can also be less than the cohesion between the particles to prevent the particles from reuniting again. When using the full-automatic spray cleaning machine, both hands must firmly hold the head of the high-pressure cleaning machine.

喷臂转动平稳：试验喷臂转动平稳均匀。喷淋清洗机底部的排水滤网没有碎屑：喷淋清洗机底部的排水滤网将保留来自仪表盘的污染物。屏幕应少每天拆下清洁一次，或根据使用频率而定。堵塞的滤网会阻碍水流和排水，影响喷淋清洗机的清洁性能。

Stable rotation of spray arm: the test spray arm rotates stably and evenly. The drainage screen at the bottom of the spray washer is free of debris: the drainage screen at the bottom of the spray washer will retain pollutants from the instrument panel. The screen should be removed and cleaned at least once a day, or depending on the frequency of use. The blocked filter screen will hinder water flow and drainage and affect the cleaning performance of the spray washer.

仪器框架联轴器与歧管正确对齐。确保喷淋清洗机的水/洗涤剂入口与洗涤架歧管正确对齐。不对中会影响水流、水分布和水压，可能导致垫圈运行不正确。水压不足会使喷淋臂无法正常工作，削弱机械清洗效果。

The instrument frame coupling is correctly aligned with the manifold. Ensure that the water / detergent inlet of the spray washer is correctly aligned with the washing rack manifold. Incorrect distribution of water pressure and water flow may result. Insufficient water pressure will make the spray arm unable to work normally and weaken the mechanical cleaning effect.

每次使用前检查清洗机和电源线是否损坏。如果注意到有损坏，请停止使用，维修之后方能再次使用。检查清洗剂的量，确保整个轮班期间有足够的清洗剂。清洗槽应少每天彻底清洗、、冲洗和烘干。根据器械的污染程度和/或清洗溶液是否污染，应更频繁地进行清洗槽维护。

Check whether the cleaning machine and power cord are damaged before each use. If you notice any damage, please stop using it and use it again after maintenance. Check the amount of cleaning agent to ensure that there is enough cleaning agent during the whole shift. The cleaning tank shall be thoroughly cleaned, disinfected, flushed and dried at least every day. According to the degree of contamination of the instrument and / or whether the cleaning solution is contaminated, the cleaning tank maintenance should be carried out more frequently.

喷淋清洗机检查的一些关键点内容讲解完毕，如果您想知道更多关于这方面的内容就来关注我们的网站www.jnthcsb.com吧！

Some key points of spray cleaning machine inspection have been explained. If you want to know more about this, please pay attention to our website www.jnthcsb.com Com!