用户在考虑使用超声波清洗机进行清洗时，在咨询供应商时应尽量提供以下内容，以便供应商快速、准确地为您推荐合适型号的机器。

When users consider using ultrasonic cleaning machine for cleaning, they should try to provide the following contents when consulting the supplier, so that the supplier can quickly and accurately recommend the appropriate model of machine for you.

工件材质、特性、尺寸、产品用途：材质主要分为金属、玻璃、塑料等，特性主要是为了避免一些不适合使用超声波或相应清洗液的场合，并且提供尺寸有利于确认机器的内胆和功率，产品的使用说明可以让供应商根据以往的经验快速提供相同或相似用途的产品工艺和解决方案；

Workpiece material, characteristics, size and product use: the material is mainly divided into metal, glass, plastic, etc. the characteristics are mainly to avoid some occasions that are not suitable for using ultrasonic or corresponding cleaning fluid, and the size is helpful to confirm the inner tank and power of the machine. The use instructions of the product can enable the supplier to quickly provide product processes and solutions for the same or similar uses according to previous experience;

需要去除的材料成分和特性：如机加工用切削油和碎屑、抛光蜡或冲压油的去除、光学镜片的磨料等；

Material composition and characteristics to be removed: such as cutting oil and debris for machining, removal of polishing wax or stamping oil, abrasive of optical lens, etc;

洗涤剂的选择，过往经验：选择水性洗涤剂工艺机或有机溶剂型机，并考虑其性能、生产安全等；

Selection of detergent, past experience: select water-based detergent process machine or organic solvent machine, and consider its performance, production safety, etc;

上下游工艺装备的日产量和产能：用户应根据现有产能规划设计机器产能，不应根据五年、十年发展盲目提出过多产能要求计划，因为大容量机器是在产能不饱和的情况下使用的。，其耗水量和能源消耗量较大，占地较大，相对设备投资也较高，导致其终生使用经济性较差；

Daily output and capacity of upstream and downstream process equipment: users should plan and design the machine capacity according to the existing capacity, and should not blindly put forward excessive capacity requirements according to the five-year and ten-year development, because large capacity machines are used under the condition of unsaturated capacity., Its water consumption and energy consumption are large, its land occupation is large, and its relative equipment investment is also high, resulting in poor lifelong use economy;

清洗工艺和烘干工艺的选择：根据自己的使用经验或同行的经验，结合供应商提出的改进工艺方案；

Selection of cleaning process and drying process: according to their own use experience or peer experience, combined with the improved process scheme proposed by the supplier;

设备采购成本核算和全寿命周期成本核算。生命周期成本核算应重点考虑电耗、水耗、耗材和维护成本。即使机器采用相同的工艺设计，由于设计思路不同，也会导致上述成本核算的使用差异较大；

Equipment procurement cost accounting and life cycle cost accounting. Life cycle cost accounting should focus on power consumption, water consumption, consumables and maintenance costs. Even if the machine adopts the same process design, the use of the above cost accounting will vary greatly due to different design ideas;

废物排放和环保问题：部分出口型企业还应考虑产品出口目的地地区的政策限制和规定；

Waste discharge and environmental protection: some export-oriented enterprises should also consider the policy restrictions and regulations of the product export destination area;

超声波清洗机生产厂家提醒大家为了验证工艺效果，下单前与供应商做一次以上的清洗实验应该是必不可少的环节。更多相关内容大家可以来关注我们的网站www.jnthcsb.com！

The manufacturer of ultrasonic cleaning machine reminds you that in order to verify the process effect, it should be an essential link to do more than one cleaning experiment with professional suppliers before placing an order. You can pay more attention to our website!