在设计超声波清洗设备时，需要遵循一定的要求和标准，如下。

When designing ultrasonic cleaning equipment, certain requirements and standards shall be followed, as follows.

要求和标准

Safety requirements and standards

一定要做好操作人员的防护工作，并采取一定的防护措施。

The safety protection of operators must be done well and certain safety protection measures must be taken.

可靠性要求和标准

Reliability requirements and standards

1、必须是严谨科学的人体工学设计，以保证其工作的可靠性和稳定性。

1. It must be a rigorous and scientific ergonomic design to ensure the reliability and stability of its work.

2、设计必须，技术很成熟，结构很紧凑，测试精度必须很高。

2. The design must be advanced, the technology is mature, the structure is compact, and the test accuracy must be very high.

3、要求电脑性能，配置非常可靠，运行时能快速完成操作。

3. It is required that the computer has good performance, reliable configuration and can complete the operation quickly when running.

3. 可操作性和可维护性的要求和标准

3. requirements and standards for operability and maintainability

1、操作非常简单易懂，配备显示屏，操作非常方便。

1. The operation is very simple and easy to understand. Equipped with display =, the operation is very convenient.

2、尽量节约能源，保证维护和使用成本很低，外观也要求美观。

2. Save energy as much as possible to ensure low maintenance and use costs and beautiful appearance.

3、维护良好，使用寿命可达10年以上。

3. Good maintenance and service life of more than 10 years.

此外超声波清洗设备是实验室中的常用设备，它具有很多优势，可以不伤害任何工件，清洁范围广，清洁的彻底，而且能够做到绿色，大大提高了实验室清洗工作效率。

In addition, ultrasonic cleaning equipment is a common equipment in the laboratory. It has many advantages. It can not hurt any workpiece. It has a wide range of cleaning and is thoroughly cleaned. It can be green and environmental protection, and greatly improve the efficiency of laboratory cleaning.

1、接通电源要符合规格要求，确保是接地的。

1. The power supply shall meet the specification requirements to ensure that it is grounded.

2、不能使用燃性清洁剂，以防使用中发生爆炸。

2. Do not use flammable detergent to prevent explosion during use.

3、注入清洗液的时候好是容器容积的四分之三，不要倒的过满。

3. The volume of the container should be three fourths of the volume when filling the cleaning solution. Do not overfill it.

4、把待清洗工件放入，再倒上清洗液，在插电源，清洗时间要设定好了，再开机。

4. Put the workpiece to be cleaned in, pour the cleaning liquid, plug in the power supply, and start the machine after the cleaning time is set.

5、切勿用重物撞击清洗缸的缸底，以免损坏物件。

5. Do not strike the bottom of the cleaning cylinder with heavy objects to avoid damaging objects.

6、使用超声波清洗设备清洗的工件不同，清洗液也要选择不同的，清洗液如果选择的不对，也会导致清洗效果不好。

6. Different cleaning fluids should be selected for different workpieces cleaned with ultrasonic cleaning equipment. If the cleaning fluid is not selected correctly, the cleaning effect will be poor.

7、清洗工作结束后，要及时倒出清洗液，并清洁仪器和清洗篮等配件。

7. After cleaning, the cleaning solution shall be poured out in time, and the instrument, cleaning basket and other accessories shall be cleaned.

8、全自动超声波清洗机清洗工作结束后，要及时关闭电源。

8. After the cleaning work of the full-automatic ultrasonic cleaning machine is completed, the power supply shall be turned off in time.

以上就是问题解答的相关内容了，希望能够帮助到大家，如对这一问题还存在任何疑问，都欢迎关注我们网站www.jnthcsb.com并咨询我们的工作人员，将竭诚为您服务。

The above is the relevant content of the question answer. I hope it can help you. If you have any questions about this problem, you are welcome to follow our website and consult our staff. We will serve you wholeheartedly.