超声波清洗机具有很强的去污效果，可以去除一些顽固的污渍，但并不是所有的物品都适合超声波清洗机。那么，用它可以清洗哪些物品呢？清洗的效果有所保障吗？

Ultrasonic cleaning machine has a strong decontamination effect, which can remove some stubborn stains, but not all items are suitable for ultrasonic cleaning machine. So, what can be cleaned with it? Is the cleaning effect guaranteed?

很常见的应用应该是不锈钢制品和金属制品的清洗。不锈钢制品广泛应用于餐饮、建筑等领域。但是，如果不定期清理表面的污垢，很容易生锈。同时，由于表面光滑，容易留下指纹等痕迹，这些不易处理，需要用超声波清洗机清洗。因为金属容易老化氧化，所以也需要用超声波清洗机清洗。

The most common application should be the cleaning of stainless steel products and metal products. Stainless steel products are widely used in catering, construction and other fields. However, if the dirt on the surface is not cleaned regularly, it is easy to rust. At the same time, because the surface is smooth, it is easy to leave fingerprints and other traces, which are not easy to deal with and need to be cleaned with an ultrasonic cleaning machine. Because the metal is easy to age and oxidize, it also needs to be cleaned by ultrasonic cleaning machine.

五金等一些机器零件等物品，往往因油脂、污垢等原因难以清洗，也需要用清洗机清洗。眼镜、相机等一些常见物品也在可以清洗的范围内。一般来说，超声波清洗机的适用范围比较广，相对来说更适合工业用途。

Hardware and other machine parts are often difficult to clean due to grease, dirt and other reasons, and also need to be cleaned with a cleaning machine. Glasses, cameras and other common items are also within the scope of cleaning. Generally speaking, the ultrasonic cleaning machine has a wide range of application and is relatively more suitable for industrial use.

但是使用超声波清洗机时不能忽视相关的问题，要提前对其进行检查，比如：

However, relevant problems should not be ignored when using the ultrasonic cleaning machine, and it should be checked in advance, such as:

检查电源线。开机前一定要检查超声波清洗机和电源线是否有损坏。如有明显损坏，必须停止使用并及时修复。

Check the power cord. Before starting the machine, be sure to check whether the ultrasonic cleaning machine and the power line are damaged. In case of obvious damage, it must be stopped and repaired in time.

检查清洗剂的用量。一定要提前检查清洗剂的用量，确保满足需要，选择更合适的清洗液。

Check the amount of cleaning agent. Be sure to check the amount of cleaning agent in advance to ensure that it meets the needs and select a more appropriate cleaning solution.

清洗槽。每天对清洗槽进行彻底清洗，并进行干燥处理，并对清洗槽进行日常维护。启动机器前，将清洗槽注满水并加入适量的清洗剂。

Cleaning tank. Clean and disinfect the cleaning tank thoroughly every day, dry it, and carry out daily maintenance for the cleaning tank. Before starting the machine, fill the cleaning tank with water and add an appropriate amount of cleaning agent.

总而言之，以上使用山东超声波清洗机的问题不容忽视。只有注意这些，才能有良好的清洁效果。

In a word, the above problems of using Shandong ultrasonic cleaning machine can not be ignored. Only by paying attention to these, can we have a good cleaning effect.

以上就是问题解答的相关内容了，希望能够帮助到大家，如对这一问题还存在任何疑问，都欢迎关注我们网站www.jnthcsb.com并咨询我们的工作人员，将竭诚为您服务。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website www.jnthcsb And consult our staff, we will serve you wholeheartedly.