全自动物料箱清洗机在使用过程中需要对其进行正确的操作,正确的操作是机器延长使用寿命的根本保证。下面
山东超声波清洗机厂家就来为您讲一讲吧。
The full-automatic material box cleaning machine needs to be operated correctly in the process of use. Correct operation is the fundamental guarantee for prolonging the service life of the machine. Next, Shandong ultrasonic cleaning machine manufacturer will tell you about it.
1、打开总电源,检查放水阀是否关闭,设置热水温度。
1. Turn on the main power supply, check whether the drain valve is closed and set the hot water temperature.
2、打开进水管阀门,当水灌满储水池后,电磁阀自动关闭停止供水。
2. Open the valve of the water inlet pipe. When the water tank is filled with water, the solenoid valve will automatically close to stop water supply.
3、储水池水灌满后,打开蒸汽管道阀门,当温度达到设定值时,电磁阀自动关闭停止蒸汽供应。
3. After the water storage tank is full, open the steam pipe valve. When the temperature reaches the set value, the solenoid valve will automatically close to stop the steam supply.
4、水灌满后,先按“RESET”按钮,再按“START”按钮,启动设备。
4. After the water is full, press the "reset" button first and then the "start" button to start the equipment.
5、灌满水之前,禁止启动水泵,生产过程中经常清洗过滤板,以免水压低于4bar,损坏水泵。
5. Before filling with water, it is forbidden to start the water pump. During the production process, the filter plate is often cleaned to avoid damage to the water pump when the water pressure is lower than 4 bar.
6、生产中出现卡盒现象时应及时停车,待故障排除后方可继续进行。
6. In case of jam in production, stop the machine in time, and continue the operation after the fault is eliminated.
7、生产结束后,停止输送机及水泵开关,关闭蒸汽阀,供水阀。
7. After production, stop the switch of conveyor and water pump, close the steam valve and water supply valve.
8、打开排水阀门进行排水并进行清洗、消毒。
8. Open the drain valve to drain, clean and disinfect.
The cleaning work and operating procedures of the automatic material box cleaning machine are introduced here. If you need more information, please follow our website www.jnthcsb.com and contact us to learn more.