欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用超声波清洗机

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-常见问题通过式清洗机的12点注意事项
常见问题

通过式清洗机的12点注意事项

作者:admin来源:http://www.jnthcsb.com/时间:2022-08-22

通过式清洗机的使用用途、高压泵容积、保养次数、操作的规范性等都影响到他的正常运行状况。下面超声波清洗机生产厂家来讲讲通过式清洗机的注意事项。
The use of the through type cleaning machine, the volume of the high-pressure pump, the number of maintenance, and the standardization of operation all affect its normal operation. Next, the manufacturer of ultrasonic cleaning machine will talk about the precautions of passing type cleaning machine.
1·当操作高压清洗机时:始终需戴适当的护目镜,手套和面具。
1. When operating the high-pressure cleaning machine: always wear appropriate goggles, gloves and masks.
2·始终让保持手和脚不接触清洗喷嘴。
2. Always keep hands and feet away from the cleaning nozzle.
3·经常要检查所有的电接头。
3. Always check all electrical connectors.
4·经常检查所有的液体。
4. Check all liquids frequently.
5·经常检查软管是否有裂缝和泄漏处。
5. Check the hose frequently for cracks and leaks.
6·当未使用喷枪时,总是需将设置扳机处于锁定状态。
6. When the spray gun is not used, always lock the setting trigger.
7·总是尽可能地使用低压力来工作,但这个压力要能足以完成工作。
7. Always use low pressure to work as much as possible, but the pressure should be enough to complete the work.
8·在断开软管连接之前,总是要先释放掉清洗机里的压力。
8. Always release the pressure in the washer before disconnecting the hose.
9·每次使用后总是要排干净软管里的水。
9. Always drain the water in the hose after each use.
10·决不要将喷枪对着自己或其他人。
10. Never point the gun at yourself or others.
超声波清洗机生产厂家
11·在检查所有软管接头都已在原位锁定之前,决不要启动设备。
11. Never start the equipment before checking that all hose connections have been locked in place.
12·在接通供应水并让适当的水流过喷枪杆之前,决不要启动设备。然后将所需要的清洗喷嘴连接到喷枪杆上。
12. Never start the equipment before turning on the supply water and letting the proper water flow through the gun barrel. Then connect the required cleaning nozzle to the spray gun rod.
注意:不要让高压清洗机在运转过程中处于无人监管的状态。每次当你释放扳机时泵将运转在旁路模式下,如果一个泵已经在旁路模式下运转了较长时间后,泵里循环水的过高温度将缩短泵的使用寿命甚损坏泵。所以,应避免使设备长时间运行在旁路模式。
Note: do not leave the high-pressure cleaning machine unattended during operation. Each time you release the trigger, the pump will operate in bypass mode. If a pump has been operating in bypass mode for a long time, the high temperature of circulating water in the pump will shorten the service life of the pump or even damage the pump. Therefore, the equipment shall not be operated in bypass mode for a long time.
大多数清洗机的故障多发生在使用过程中,因此要想在根源上避免故障就应当在清洗机设备工作时坚持规范操作,随时监测它的运行状况。更多相关内容就来我们网站www.jnthcsb.com进行咨询吧。
Most of the faults of the cleaning machine occur in the process of use. Therefore, to avoid the fault at the root, it is necessary to adhere to the standard operation during the operation of the cleaning machine and monitor its operation at any time. For more information, please visit our website www.jnthcsb.com.