欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用超声波清洗机

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-常见问题超声波清洗机购买注意事项及操作步骤
常见问题

超声波清洗机购买注意事项及操作步骤

作者:admin来源:http://www.jnthcsb.com/时间:2022-09-24

超声波清洗机能快速把粘附在物件上的污垢处理,达到清洁目的。所以超声波清洗机在我们生活中的应用中越来越广泛,很多人都想学习超声波清洗机的操作流程,今天小编就为大家介绍购买超声波清洗机的注意事项及操作步骤。
The ultrasonic cleaning machine can quickly remove the dirt adhered to the objects to achieve the purpose of cleaning. Therefore, ultrasonic cleaners are more and more widely used in our lives. Many people want to learn the operation process of ultrasonic cleaners. Today, Xiaobian will introduce the precautions and operation steps for purchasing ultrasonic cleaners.
购买清洗机注意事项:
Precautions for purchasing cleaning machine:
清洗槽的规格大小。对于其尺寸的选择来说,在进行挑选的时候,应该根据工件的规格与需求进行考虑,当然这属于一个基础性的问题。
The size of the cleaning tank. For the size selection, it should be considered according to the specification and requirements of the workpiece, which is of course a fundamental problem.
了解上下料输送系统的完整性。这一点对于清洗机来说是重要的一个系统,只不过在进行程序控制的时候,我们应该了解具体的内部构成,这样在进行操作的时候,才可以确保其上下料的输送更加的顺利与有效。
Understand the integrity of the loading and unloading conveying system. This is an important system for the washing machine. However, we should know the specific internal composition when carrying out program control, so that we can ensure that the feeding and unloading of the washing machine is more smooth and effective during operation.
明确自动控制体系的有效性。相比于手动操作来说,自动控制体系的出现也是属于一个明显。
Clarify the effectiveness of the automatic control system. Compared with manual operation, the emergence of automatic control system is also obvious.
超声波清洗机
超声波清洗机操作步骤:
Operation steps of ultrasonic cleaning machine:
1、安装时要参考说明书,了解到机器是由电控柜与主机,连接的是380VAC电源,安装清洗机进水管、排水管和溢流管。安装一切完毕。
1. During installation, refer to the manual to learn that the machine is connected to the main machine by the electric control cabinet and 380VAC power supply. Install the water inlet pipe, drain pipe and overflow pipe of the washer. Installation is complete.
2、添加适量水水面高度要超过清洗零件高度,但在注意不要超过3/4。
2. The height of the water surface added with proper amount of water should exceed the height of the cleaned parts, but it should not exceed 3/4.
3、给清洗机水加温,启动加热开关,调好适当温度,一般在60度,因为清洗剂适宜温度不超过70度,加入清洗剂充分搅拌溶解
3. Heat the water of the cleaning machine, start the heating switch, and adjust the appropriate temperature, generally at 60 ℃. Because the appropriate temperature of the cleaning agent does not exceed 70 ℃, add the cleaning agent to fully stir and dissolve it
4、零部件清洗前用到把零件表面的污垢处理掉,这让就可以让清洁更简单,设备寿命也在加长。
4. The dirt on the surface of the parts should be removed before cleaning the parts, which can make cleaning easier and prolong the service life of the equipment.
一般来说,超声波清洗机在使用的时候是需要符合操作规程的,这也是为了确保操作者的而考虑的,这方面对于操作人员的技术要求是严格的,您还有什么使用问题或者说需求就来我们网站www.jnthcsb.com咨询吧!
Generally speaking, the ultrasonic cleaning machine needs to comply with the operating procedures when it is used, which is also considered to ensure the safety of the operator. In this regard, the technical requirements for the operator are strict. If you have any questions or needs, please come to our website www.jnthcsb.com for advice!