多槽手动超声波清洗机的超声波清洗技术在汽车发动机气缸体及零部件清洗中的超声波应用，与传统清洗方式相比，超声波清洗有如下优点：

Compared to traditional cleaning methods, ultrasonic cleaning has the following advantages:

1．清洗更彻底

1. More thorough cleaning

超声波清洗技术的超声波原理表明该种方式非常适合清洗发动机气缸体、气缸盖类形状复杂的构件。这类零部件若用人工清洗，有很多部位是难以或无法清洗到的，使用工具也无法取得良好的清洗效果。清洗剂只能溶解部分污垢，对于顽固污垢及零件内部的污垢也是力不从心。超声波技术清洗是一种奇妙的物理清洗方法，犹如无数小刷子同时清洗物体的内外表面，因此可以使传统方法无法完成的内表面及内孔的清洗一次完成。

The ultrasonic principle of ultrasonic cleaning technology indicates that this method is very suitable for cleaning complex shaped components such as engine cylinder blocks and cylinder heads. If such parts are manually cleaned, many parts are difficult or impossible to clean, and the use of tools cannot achieve good cleaning results. Cleaning agents can only dissolve part of the dirt, and are also inadequate for stubborn dirt and dirt inside parts. Ultrasonic technology cleaning is a wonderful physical cleaning method, like countless small brushes simultaneously cleaning the internal and external surfaces of objects. Therefore, it can complete the cleaning of internal surfaces and holes that cannot be completed by traditional methods at one time.

2．操作安全、节约能源

2. Safe operation and energy saving

小型零部件的清洗目前多使用汽油或柴油刷洗，因此操作安全系数很低，易造成事故。而超声波技术清洗使用水基清洗剂，无事故隐患。

Currently, gasoline or diesel oil is commonly used for cleaning small components, resulting in a low operating safety factor and easy to cause accidents. Ultrasonic technology uses water-based cleaning agents for cleaning, without potential accidents.

3．工作效率高

3. High work efficiency

只需将零部件解体后放在清洗机的丝网料筐中并按一下开关即可，在清洗过程中，维修人员可以做其他工作。

Simply disassemble the parts and place them in the wire mesh basket of the cleaning machine and press the switch once. During the cleaning process, maintenance personnel can do other work.

4．清洗成本低

4. Low cleaning cost

因清洗剂重复使用率高，耗材采购廉价，故清洗成本一般只有传统清洗方法的1／3至1／8。

Due to the high reuse rate of cleaning agents and the cheap procurement of consumables, the cleaning cost is generally only 1/3 to 1/8 of that of traditional cleaning methods.

此外要注意，超声波清洗机不适用于油漆，压电陶瓷切片，软材料。它可用于电子零件，电镀，硬件，时钟，带子，工具，光学镜头，珠宝，镜头，眼镜框架，半通道晶圆，喷丝头过滤器和玻璃器皿，手机零件，汽车维护等。更多的相关事项了解就来我们网站http://www.jnthcsb.com咨询！

In addition, it should be noted that ultrasonic cleaning machines are not suitable for paints, piezoelectric ceramic chips, and soft materials. It can be used for electronic parts, electroplating, hardware, clocks, belts, tools, optical lenses, jewelry, lenses, eyeglass frames, half channel wafers, spinneret filters and glassware, mobile phone parts, car maintenance, etc. For more information on related matters, please visit our website http://www.jnthcsb.com consulting service