结构组成：

Structural composition:

主要由喷淋头、液压泵、水箱、水泵、清洗液箱和控制系统等部分组成。喷淋头通过喷嘴将清洗液喷射到待清洗物体表面；液压泵负责将水转化为高压水；水箱储存水；水泵负责将水输送到清洗系统中；清洗液箱储存清洗液；控制系统则负责对整个清洗过程进行控制和调节。

It mainly consists of sprinkler head, hydraulic pump, water tank, water pump, cleaning solution tank, and control system. The spray head sprays cleaning solution onto the surface of the object to be cleaned through a nozzle; The hydraulic pump is responsible for converting water into high-pressure water; Water storage tank for storing water; The water pump is responsible for delivering water to the cleaning system; Storage of cleaning solution in the cleaning solution tank; The control system is responsible for controlling and regulating the entire cleaning process.

工作原理：

working principle:

设备通过喷淋清洗段、喷淋漂洗段、风切吹水段、烘干段等组成一条连续生产线。操作者将要清洗的工件放置在专门设计的进料端上，设备采用左进右出的输送方式，通过传输带将工件依次送往各工序段进行清洗、漂洗、切水和烘干等处理。整个清洗过程由PLC全自动控制，速度可调，确保清洗后的工件无油、无污物、干燥且无明显水迹。

The equipment forms a continuous production line through spray cleaning section, spray rinsing section, wind cutting and water blowing section, drying section, etc. The operator places the workpiece to be cleaned on a specially designed feeding end, and the equipment adopts a left in and right out conveying method. The workpiece is sequentially sent to each process section through a conveyor belt for cleaning, rinsing, water cutting, and drying. The entire cleaning process is fully controlled by PLC with adjustable speed, ensuring that the cleaned workpiece is free of oil, dirt, dry, and has no obvious water stains.

使用方法：

usage method:

将待清洗物料放入槽体内，启动滚筒使物料在槽体内进行滚动运动。同时启动喷淋系统，通过喷嘴将清洗液均匀喷射到物料表面进行清洗。清洗完成后，物料经过排水装置排出槽体，并进行后续处理（如烘干等）。在使用过程中，可根据实际需要调整喷淋强度、角度等参数以达到清洗效果。

Place the material to be cleaned into the tank and start the drum to make the material roll in the tank. Simultaneously activate the spray system and evenly spray the cleaning solution onto the surface of the material through the nozzle for cleaning. After cleaning, the material is discharged from the tank through a drainage device and undergoes subsequent processing (such as drying). During use, parameters such as spray intensity and angle can be adjusted according to actual needs to achieve the best cleaning effect.

注意事项：

matters needing attention:

在使用前需检查设备各部件是否完好无损并处于正常工作状态；在使用过程中应注意操作规范并避免手部或其他身体部位接触到高速旋转的部件或高温的清洗液；使用后应及时清理设备并关闭电源以确保设备长期稳定运行。

Before use, it is necessary to check whether all components of the equipment are intact and in normal working condition; During use, attention should be paid to safe operating procedures and hands or other body parts should be avoided from coming into contact with high-speed rotating components or high-temperature cleaning solutions; After use, the equipment should be cleaned promptly and the power should be turned off to ensure long-term stable operation.

本文由CNC高压清洗机友情奉献.更多有关的知识请点击:http://www.jnthcsb.com 真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from CNC high-pressure cleaning machine. For more related knowledge, please click: http://www.jnthcsb.com Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned