超声波清洗机与传统清洗方式相比，超声波清洗有如下优点：

Compared with traditional cleaning methods, ultrasonic cleaning machine has the following advantages:

1．清洗更彻底

1. More thorough cleaning

超声波清洗机原理表明该种方式非常适合清洗形状复杂的构件。这类零部件若用人工清洗，有很多部位是难以或无法清洗到的。清洗剂只能溶解部分污垢，对于顽固污垢及零件内部的污垢也是力不从心。超声波清洗机技术清洗是一种奇妙的物理清洗，犹如无数小炸弹同时爆破清除物体的内外表面，如再结合清洗剂的化学清洗，因此可以使传统方法无法完成的内表面及内孔的清洗一次完成。

The principle of ultrasonic cleaning machine shows that this method is very suitable for cleaning complex shape components. If such parts are cleaned manually, many parts are difficult or impossible to clean. The cleaning agent can only dissolve part of the dirt, and it is not enough for the stubborn dirt and the dirt inside the parts. Ultrasonic cleaning machine technology cleaning is a wonderful physical cleaning, like countless small bombs blasting to remove the internal and external surface of the object at the same time, such as chemical cleaning combined with cleaning agent, so that the traditional method can not complete the internal surface and inner hole cleaning at one time.

2．节约能源

2. Energy saving

小型零部件的清洗目前多使用汽油或柴油刷洗，因此操作安全系数很低，易造成事故。而超声波技术清洗使用水基清洗剂，绝无事故隐患。 v

At present, most of the small parts are cleaned with gasoline or diesel oil, so the safety factor of operation is very low, which is easy to cause accidents. But the ultrasonic technology cleaning uses the water-based cleaning agent, has no accident hidden danger. 

3．工作效率高

3. High efficiency

只需将零部件解体后放在清洗机的丝网料筐中并按一下开关即可自动清洗。

Just put the parts into the wire mesh basket of the cleaning machine and press the switch to clean them automatically.

4．清洗成本低

4. Low cleaning cost

因清洗剂重复使用率高，耗材采购廉价， 在所有清洗方式中，清洗成本大体可分为：设备成本和消耗成本。超声波清洗机设备使用寿命约为十年，除设备购置成本高于手工清洗和有机碱性溶剂刷洗外，低于气相清洗和高压水射流清洗。

Due to the high reuse rate of cleaning agent and the low cost of consumables procurement, the cleaning cost can be roughly divided into: equipment cost and consumption cost. The service life of ultrasonic cleaning machine is about 10 years. The cost of equipment purchase is higher than that of manual cleaning and organic alkaline solvent brushing, but lower than that of gas phase cleaning and high pressure water jet cleaning.

5.清洗效果好：就清洗方式而言，运用于工业清洗的清洗方式一般为手工清洗，有机溶剂清洗，蒸汽气相清洗，高压水射流清洗和超声波清洗，根据清洗效果可以明显地区分清洗的方式，超声波清洗机被国际公认为当前效率高，效果好的清洗方式，其清洗效率达到了98%以上，清洗洁净度也达到了高级别，而传统的手工清洗和有机溶剂清洗的清洗效率仅仅为60%-70%，即使是气象清洗和高压水射流清洗的清洗效率也低于90%，因此，在工业清洗中，超声波清洗机以其效率高，效果好，适用于大工作量清洗的特性无疑是清洗的佳选择，这也是为什么凡是对洁净度要求高的行业。

5. Good cleaning effect: as far as the cleaning methods are concerned, the cleaning methods used in industrial cleaning are generally manual cleaning, organic solvent cleaning, steam vapor cleaning, high pressure water jet cleaning and ultrasonic cleaning. According to the cleaning effect, the cleaning methods can be obviously distinguished. The ultrasonic cleaning machine is internationally recognized as the most efficient and effective cleaning method, and its cleaning efficiency is the best The cleaning efficiency of traditional manual cleaning and organic solvent cleaning is only 60% - 70%. Even the cleaning efficiency of meteorological cleaning and high-pressure water jet cleaning is less than 90%. Therefore, in industrial cleaning, ultrasonic wave cleaning machine is undoubtedly cleaning with its high efficiency and good effect, which is suitable for large workload cleaning The best choice, this is also why all the high cleanliness requirements of the industry.

相关标签:超声波清洗机生产厂家