The ultrasonic steel mesh cleaning machine is more suitable for cleaning the steel mesh. It saves time, worry and effort. The steel mesh was initially made of metal mesh, so it was called a mask at that time. It started with nylon polyester mesh, followed by durable, slightly colored metal mesh and copper mesh, and then stainless steel metal mesh. However, no matter what kind of wire mesh, it has the disadvantages of poor formability and low precision.

随着SMT技术的发展，对钢网的要求越来越高，产生了超声波钢网清洗机。由于材料成本和制作工艺的难度和便捷性，原来的钢网是用铁铜板制作的，但是因为生锈了，所以用不锈钢网代替，也就是现在的钢网。清洗钢网用超声波钢网清洗机更适合，省时、省心、省力。

With the development of SMT technology, the demand for steel mesh is higher and higher, and ultrasonic steel mesh cleaning machine is produced. Due to the material cost and the difficulty and convenience of the manufacturing process, the original steel mesh was made of iron copper plate, but it was rusted, so it was replaced by stainless steel mesh, that is, the current steel mesh. Ultrasonic steel mesh cleaning machine is more suitable for cleaning steel mesh, saving time, worry and effort.

SMT钢网必须在使用前、期间和使用后清洗，通常钢网用超声波钢网清洗机进行清洗，这种清洗机也被之为超声波钢网清洗机，为使钢网变形平稳，在使用过程中应定期擦拭钢网底部。钢网使用后，必须及时超声波钢网清洗机清洗干净，以达到与下次相同的释放效果。钢网清洗方法通常包括擦拭和超声波清洗。用预先浸透的无螺纹布(或特殊的钢网擦纸)擦拭蜡纸，除去固化的沙克糊或粘合剂。

SMT steel mesh must be cleaned before, during and after use. Usually, the steel mesh is cleaned by ultrasonic steel mesh cleaning machine, which is also called ultrasonic steel mesh cleaning machine. In order to make the steel mesh deformation stable, the bottom of the steel mesh should be wiped regularly during use. After the steel mesh is used, it must be cleaned by ultrasonic steel mesh cleaning machine in time to achieve the same release effect as the next time. Steel mesh cleaning methods usually include wiping and ultrasonic cleaning. Wipe the wax paper with a pre soaked non thread cloth (or special steel mesh wiping paper) to remove the cured Sark paste or adhesive.

超声波钢网清洗机既实用、有效、安全、对人和环境都安全，又能成功地将s移到钢网的s中。有一种特殊的钢网清洗剂，但请小心，因为钢网可能会被洗掉。如无特殊要求，可使用酒精或去离子水代替钢网专用清洗剂。

Ultrasonic steel mesh cleaning machine is not only practical, effective, safe and safe for people and environment, but also can successfully move s to s of steel mesh. There is a special mesh cleaner, but be careful because the mesh may be washed off. If there are no special requirements, alcohol or deionized water can be used instead of special cleaning agent for steel mesh.

有些厂家可能是用手工手洗钢网的。然而，这种洗手方式非常耗时，而且有些地方很难清洁。无论手动清洗多么仔细，都不可能清洗复杂形状、开口和其他钢网表面配置的位置。这是一个头痛的问题。

Some manufacturers may wash the steel mesh by hand. However, this method of hand washing is very time-consuming, and some places are difficult to clean. No matter how careful the manual cleaning is, it is impossible to clean the positions of complex shapes, openings and other steel mesh surface configurations. This is a headache.

使用超声波钢网清洗机来解决问题各种实验研究表明，与其他清洗技术相比，超声波清洗节省时间，清洗效果更好。

Various experimental studies show that compared with other cleaning technologies, ultrasonic cleaning saves time and has better cleaning effect.

超声波钢网清洗机主要是利用超声波在液体中的空化、加速和直接流动效应，直接和间接地影响液体和污垢，对污垢层进行分散、乳化和剥离，以达到清洗的目的。高强度、高频超声波在清洗液中产生空化，上千个极细气泡将腔内污染物剥离，有效清洗腔内死角而不损坏腔体。

Ultrasonic steel mesh cleaning machine mainly uses the cavitation, acceleration and direct flow effects of ultrasonic in liquid to directly and indirectly affect liquid and dirt, and disperse, emulsify and peel off the dirt layer, so as to achieve the purpose of cleaning. The high-intensity and high-frequency ultrasonic wave produces cavitation in the cleaning solution, and thousands of very fine bubbles peel off the pollutants in the cavity, so as to effectively clean the dead corners in the cavity without damaging the cavity.