除了做好CNC高压清洗机的日常维护和保养外，对于平时会出现的一些小问题，我们也要学会排查，下面就跟大家分析下关于CNC高压清洗机出水压力不足的原因和处理方法有哪几种。

In addition to the daily maintenance of the CNC high-pressure washer, we should also learn to troubleshoot some small problems that usually occur. Now we will analyze the causes and treatment methods of the insufficient water pressure of the CNC high-pressure washer.

1.CNC高压清洗机高压喷嘴出现严重磨损，高压喷嘴磨损过度会影响设备的出水压力，应及时的去更换新的喷嘴。

1. The high pressure nozzle of CNC high pressure washer is seriously worn, and excessive wear of the high pressure nozzle will affect the water outlet pressure of the equipment, so it should be replaced in time.

2.接入设备的进水流量不足导致水流量不足，从而输出压力不足。应及时供应足够进水流量，即可出水压力降低的问题。

2. Inadequate water inflow to the equipment leads to insufficient water flow, resulting in insufficient output pressure. The problem of water outlet pressure reduction can be solved by timely supplying sufficient water inlet flow.

3.CNC高压清洗机清洁进水过滤器有空气，应排尽清洁进水过滤器内的空气后，确保输出标准的出水压力。

3. There is air in the clean water inlet filter of CNC high-pressure washer. After the air in the clean water inlet filter is exhausted, ensure that the standard water outlet pressure is output.

4.CNC高压清洗机溢流阀老化后，造成水流溢流量大，压力变低，当发现其老化时就要及时更换配件。

4. After the aging of the overflow valve of the CNC high-pressure washer, the overflow flow of water will be large and the pressure will become low. When it is found that it is aging, it is necessary to replace the parts in time.

5.CNC高压清洗机高低压水封和进出水单向阀出现泄漏现象导致工作压力变低，应及时更换这些配件。

5. In case of leakage of high and low pressure water seal and inlet and outlet one-way valve of CNC high-pressure washer, which leads to low working pressure, these accessories shall be replaced in time.

6.高压管、过滤装置扭结、弯折或者损坏，导致水流流通不畅，导致出水压力不足，应及时修复。

6. The high pressure pipe and filter device are twisted, bent or damaged, resulting in poor water flow and insufficient outlet pressure, which shall be repaired in time.

7.高压泵内部出现故障，易损件磨损，水流量降低;设备内部管路出现堵塞，水流量太小，导致工作压力过低。

7. High pressure pump has internal failure, wearing parts are worn, and water flow is reduced; The pipeline inside the equipment is blocked and the water flow is too small, resulting in low working pressure.

好的清洁设备应该懂得及时的保养与维护，提高清洁设备的使用寿命，减低清洁成本支出。更多相关内容的了解就来我们网站www.jnthcsb.com咨询吧！

Good cleaning equipment should know how to timely maintain, improve the service life of cleaning equipment, and reduce cleaning costs. For more information, please visit our website www.jnthcsb.com!