多槽手动超声波清洗机是相对于单槽超声波清洗机而言的。清洗槽的数量和具体功能因清洗物件和清洗工艺而不同，通常是将多道超声波清洗与其它清洗方式高压喷淋清洗、喷气喷流清洗、热浸泡清洗、鼓泡清洗等清洗方式组合。下面小编就对多槽手动超声波清洗机常见的几种清洗组合及功能作简单介绍。

Multi tank manual ultrasonic cleaner is relative to single tank ultrasonic cleaner. The number and specific functions of the cleaning tank vary depending on the cleaning objects and cleaning process. Usually, the multi-channel ultrasonic cleaning is combined with other cleaning methods such as high-pressure spray cleaning, jet cleaning, hot soak cleaning, bubble cleaning, etc. The following section briefly introduces several common cleaning combinations and functions of the multi tank manual ultrasonic cleaning machine.

1，双槽超声波清洗机：该类型清洗机和单槽机一样是常见的超声波清洗设备家族成员，常用于散热器、不锈钢制品、电镀工艺品、仪器仪表、机械零部件、液压件、电镀模具等工件的清洗，具体工艺中双槽超声波设备一般有以下种组合方式：

1. Double tank ultrasonic cleaning machine: This type of cleaning machine is a member of the common ultrasonic cleaning equipment family, just like the single tank machine. It is commonly used for cleaning radiators, stainless steel products, electroplating handicrafts, instruments, mechanical parts, hydraulic parts, electroplating molds and other workpieces. In the specific process, the double tank ultrasonic equipment generally has the following combinations:

超声波粗洗槽和超声波精洗槽，超声波清洗槽和超声波漂洗槽，超声波清洗槽和清水漂洗槽，超声波电解清洗槽和除锈槽等。其中，超声波清洗槽和清水漂洗槽组合模式其清洗精度和单槽超声波清洗机一样，适用于对清洗精度有一定要求但要求又不是太高的清洗。

Ultrasonic rough cleaning tank and ultrasonic fine cleaning tank, ultrasonic cleaning tank and ultrasonic rinsing tank, ultrasonic cleaning tank and clean water rinsing tank, ultrasonic electrolytic cleaning tank and rust removal tank, etc. Among them, the combined mode of ultrasonic cleaning tank and clean water rinsing tank has the same cleaning accuracy as the single tank ultrasonic cleaning machine, which is suitable for cleaning with certain requirements for cleaning accuracy but not too high.

对于清洗洁度和精度要求很高的清洗一般选用超声波粗洗槽和超声波精洗槽的组合模式或更多清洗槽的设备，通常先用低频率段振幅大去污力强的超声清洗机进行超声波粗洗，再用较高频率段的清洗机进行高洁度清洗。

For cleaning with high requirements on cleanliness and precision, the combination mode of ultrasonic rough cleaning tank and ultrasonic fine cleaning tank or equipment with more cleaning tanks are generally selected. Generally, ultrasonic rough cleaning is performed with ultrasonic cleaning machine with large amplitude in low frequency range and strong decontamination force, and then high cleanliness cleaning is performed with cleaning machine in high frequency range.

2，三槽超声波清洗机：该类超声清洗设备通常是在双槽超声波清洗系统上加上热风烘干、慢拉风干等干燥系统，比双槽超声波多一个烘干槽，也有部分三槽清洗机设备为超声波粗洗和超声精洗外加超声漂洗槽组成。

2. Three tank ultrasonic cleaning machine: This type of ultrasonic cleaning equipment is usually a double tank ultrasonic cleaning system with hot air drying, slow pull air drying and other drying systems, which is more than the double tank ultrasonic drying tank. Some three tank cleaning equipment is composed of ultrasonic rough cleaning, ultrasonic fine cleaning and ultrasonic rinsing tank.

3，四槽超声波清洗机：该类超声清洗机通常由超声波粗洗槽、超声精洗槽、超声漂洗槽和干燥槽四个清洗槽组成。四槽机适用于电子零件、电子仪器、PCB线路板、机械零部件、仪器仪表壳和五金电镀件等的清洗。

3. Four tank ultrasonic cleaning machine: This type of ultrasonic cleaning machine is usually composed of four cleaning tanks: ultrasonic rough cleaning tank, ultrasonic fine cleaning tank, ultrasonic rinsing tank and drying tank. The four slot machine is applicable to the cleaning of electronic parts, electronic instruments, PCB circuit boards, mechanical parts, instrument shells and hardware electroplating parts.

4，五槽超声波清洗机：五槽清洗机设备通常是在两道或三道超声清洗工艺和干燥系统上加上高压喷淋清洗或浸泡清洗（热水浸泡或冷水浸泡）或蒸汽清洗，鼓泡清洗等。

4. Five tank ultrasonic cleaning machine: The five tank ultrasonic cleaning machine is usually equipped with two or three ultrasonic cleaning processes and drying systems plus high-pressure spray cleaning or immersion cleaning (hot water immersion or cold water immersion), steam cleaning, bubble cleaning, etc.

5，六槽、七槽和更多清洗槽超声波清洗机：因具体清洗工艺而不同，通常由以下几个清洗槽部分或全部组成：高压喷淋槽、鼓泡清洗槽、鼓气清洗槽、超声粗洗槽、超声精洗槽、超声漂洗槽、超声除油除锈槽、热水或冷水浸泡槽、酸洗槽、市水漂洗槽、纯水漂洗槽、蒸汽清洗槽、切风槽、热风干燥槽、喷油槽和冷却槽等。

5. Ultrasonic cleaning machine for six, seven and more cleaning tanks: depending on the specific cleaning process, it usually consists of the following cleaning tanks in part or in whole: high-pressure spray tank, bubble cleaning tank, air blowing cleaning tank, ultrasonic rough cleaning tank, ultrasonic fine cleaning tank, ultrasonic rinsing tank, ultrasonic oil and rust removal tank, hot or cold water immersion tank, acid cleaning tank, municipal water rinsing tank, pure water rinsing tank, steam cleaning tank, wind cutting tank, hot air drying tank Injection tank and cooling tank, etc.

多槽手动超声波清洗机常见的几种清洗组合及功能就讲解到这里了，从这五点中希望能够给您好的帮助！如果您还有什么不明白的事项要咨询了解，欢迎来我们网站www.jnthcsb.com进行了解！

This is the end of several common cleaning combinations and functions of the multi slot manual ultrasonic cleaner. I hope to give you some help from these five points! If you still have something you don't understand, please come to our website www.jnthcsb.com to learn!