全自动超声波清洗机将功率超声频源的声能转换成机械振动，破坏污物与清洗件表面的吸附，引起污物层的疲劳破坏而被驳离，气体型气泡的振动对固体表面进行擦洗。那么面对全自动超声波清洗机这三种故障怎么处理？

The full-automatic ultrasonic cleaning machine converts the sound energy of the power ultrasonic frequency source into mechanical vibration, destroys the adsorption between the dirt and the surface of the cleaning part, causes the fatigue damage of the dirt layer and is removed, and the vibration of gas-type bubbles scrubs the solid surface. So how to deal with these three kinds of faults of automatic ultrasonic cleaning machine?

散热风扇能转动，但无超声波输出

The cooling fan can rotate, but there is no ultrasonic output

可能是因为功率管损坏或保险丝熔断，主板上的功率管会因为机器的长时间使用，导致功率管出现短路情况。

It may be because the power tube is damaged or the fuse is blown. The power tube on the main board will be short-circuited due to the long time use of the machine.

功率管在主板上连接时，用万用表测量功率管两侧管脚的阻值。

When the power tube is connected on the main board, use a multimeter to measure the resistance of the pins on both sides of the power tube.

开启电源就跳闸

Trip when the power is turned on

需要检查发生器电源线有无短路，发生器整流桥是否有问题，可使用万用表测量发生器整流桥四个脚有没短路，如果短路了，需要更换整流桥。

It is necessary to check whether the generator power line has a short circuit and whether the generator rectifier bridge has a problem. Use a multimeter to measure whether the four pins of the generator rectifier bridge have a short circuit. If there is a short circuit, replace the rectifier bridge.

清洗效果不理想

The cleaning effect is not ideal

造成这个问题有可能是因为超声波频率协调没有调节好、清洗槽内的清洗液液位放置不当或液体温度过高、使用的清洗液不符合规格，这些需要根据设备及被清洗物品的材质大小所调节。

This problem may be caused by improper adjustment of the ultrasonic frequency coordination, improper placement of the cleaning fluid level in the cleaning tank or high liquid temperature, and the use of cleaning fluid that does not meet the specifications. These need to be adjusted according to the material size of the equipment and the cleaned items.

为了不影响设备的正常使用，一旦发现问题需及时进行维修处理，不可带“病”工作，以免造成更大的损伤。您有需求就来我们网站http://www.jnthcsb.com进行咨询了解吧！

In order not to affect the normal use of the equipment, once problems are found, they need to be repaired and handled in time. Do not work with "disease" to avoid causing greater damage. Come to our website if you need http://www.jnthcsb.com Consult and understand!