The most significant advantage of the fully automatic hydrocarbon cleaning machine is that the cleaning solvent used in this equipment is hydrocarbon solvent, which is a relatively environmentally friendly cleaning solution because its chemical composition is relatively simple and there are not too many complex elements. It is a hydrocarbon, a fractionation product of crude oil, only containing the common C and H elements, but with a different molecular structure.

全自动碳氢清洗机的洁净力相对于其他清洗机来说，其洁净力比较显著，光是清洗我们常见的盲孔工件、异型工件以及具有深孔的电池钢壳等工件都可以清洗干净，网友们会问，这些工件的油污也不一定要用你们这台设备才能清洗干净吧！我们用普通的清洗机也能洗得干净啊！普通的清洗机确实能洗这类型的工件，但却有它的弊端，即普通清洗机一般价格较为便宜，清洗工艺简单，槽体单一，没有真空系统，使用的清洗剂复杂多样。我们暂且把它称之为常压清洗，在常压清洗状态下，像具有深微盲孔的工件以及精密零件的孔内部是无法清洗干净的，因为清洗剂中含有大量空气无法排出，清洗液也就无法流进五金工件的深孔内溶解油污，即使是有，也浸润的不彻底，会有油污残留。

The cleanliness of fully automatic hydrocarbon cleaning machines is relatively significant compared to other cleaning machines. Simply cleaning common blind hole workpieces, irregular workpieces, and battery steel shells with deep holes can be cleaned clean. Netizens may ask, it is not necessary to use your equipment to clean the oil stains on these workpieces! We can clean it even with a regular cleaning machine! Ordinary cleaning machines can indeed clean this type of workpiece, but they have their drawbacks: they are generally cheaper, have simple cleaning processes, have a single tank, do not have a vacuum system, and use complex and diverse cleaning agents. We will temporarily refer to it as atmospheric cleaning. Under atmospheric cleaning conditions, workpieces with deep and micro blind holes and the interior of precision parts cannot be cleaned thoroughly because the cleaning agent contains a large amount of air that cannot be discharged, and the cleaning solution cannot flow into the deep holes of hardware workpieces to dissolve oil stains. Even if there is, it is not thoroughly soaked and there will be residual oil stains.

另外，由于普通清洗的清洗方式较为单一，就连干燥系统也相对简单，无非是用高温烘干，并且也是在常压状态下烘干的，这也会让工件的孔内壁烘干不彻底，就算从外表看不出工件有什么异样，其实锈蚀已经在悄悄开始，工件孔缝内部会开始慢慢生锈，久而久之，就会锈蚀整个工件，从而降低产品的合格率。使用全自动碳氢清洗机就能避免以上两种情况的发生，因为我们的清洗机的清洗工艺较为多元化，集多个清洗槽于一体，结合真空清洗、真空干燥技术，使得工件在清洗的过程中可以360度无死角的被碳氢清洗液浸透，在真空干燥环节，我们的真空系统也会把工件孔隙内的空气抽出来，从而实现从内而外的清洗、烘干效果！

In addition, due to the relatively simple cleaning method of ordinary cleaning, even the drying system is relatively simple. It is only dried at high temperature and also under normal pressure, which can cause the inner wall of the workpiece to not be completely dried. Even if there is no abnormality on the surface, the rust is actually quietly starting, and the interior of the workpiece hole seam will gradually rust, and over time, the entire workpiece will rust, Thus reducing the qualification rate of the product. The use of a fully automatic hydrocarbon cleaning machine can avoid the occurrence of the above two situations, because our cleaning process is more diverse, integrating multiple cleaning tanks, combined with vacuum cleaning and vacuum drying technology, so that the workpiece can be immersed in hydrocarbon cleaning solution 360 degrees without dead corners during the cleaning process. During the vacuum drying process, our vacuum system also extracts air from the pores of the workpiece, Thus achieving cleaning and drying effects from the inside out!

本文由碳氢清洗机友情奉献.更多有关的知识请点击: http://www.jnthcsb.com 真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待

This article is a friendly contribution from the hydrocarbon cleaning machine. For more relevant knowledge, please click on: http://www.jnthcsb.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned