For the use method of standard Ultrasonic cleaning, the specific steps are as follows:

1. 准备工作：确保清洗机的供电插座可用，并检查设备的电源线是否完好无损。同时，检查清洗机内部是否有残留物，如有需要。

1. Preparation: Ensure that the power socket of the cleaning machine is available and check if the power cord of the equipment is intact. At the same time, check if there is any residue inside the cleaning machine, and if necessary, remove it.

2. 配置清洗剂：根据清洗对象的不同，选择适合的清洗剂，并按照清洗剂的要求配置合适的浓度。将清洗剂加入清洗机的清洗槽中，注意不要超过大标识线。

2. Configuration of cleaning agents: Select suitable cleaning agents based on the different cleaning objects, and configure the appropriate concentration according to the requirements of the cleaning agent. Add the cleaning agent to the cleaning tank of the cleaning machine, taking care not to exceed the maximum marking line.

3. 装载清洗物：将待清洗的物品放入清洗机的清洗槽中。注意避免过度密集或拥挤，以免影响清洗效果。

3. Loading cleaning materials: Place the items to be cleaned into the cleaning tank of the cleaning machine. Pay attention to avoiding excessive density or crowding to avoid affecting the cleaning effect.

4. 设置参数：根据清洗对象的质地、尺寸和脏污程度，设置合适的清洗参数。清洗参数包括清洗时间、温度、液位、喷淋压力等。应根据清洗机的说明书进行设置。

4. Setting parameters: Set appropriate cleaning parameters based on the texture, size, and degree of dirt of the cleaning object. The cleaning parameters include cleaning time, temperature, liquid level, spray pressure, etc. It should be set according to the instructions of the cleaning machine.

5. 开始清洗：按下清洗机上的启动按钮，开始清洗过程。在清洗过程中，清洗机会根据预设的参数进行自动操作，包括喷淋、浸泡、清洗液循环等。

5. Start cleaning: Press the start button on the cleaning machine to start the cleaning process. During the cleaning process, the cleaning machine automatically operates according to preset parameters, including spraying, soaking, cleaning solution circulation, etc.

6. 监测清洗过程：在清洗过程中，可以通过观察清洗机的显示屏或指示灯来监测清洗机的工作状态。确保整个清洗过程顺利进行，并根据需要进行必要的调整。

6. Monitoring the cleaning process: During the cleaning process, the working status of the cleaning machine can be monitored by observing its display screen or indicator light. Ensure the smooth progress of the entire cleaning process and make necessary adjustments as needed.

7. 完成清洗：清洗完成后，清洗机会自动停止工作。此时，打开清洗机的排水阀，将废液排出。然后取出清洗物，可用干净的布或纸巾擦干，使其完全干燥。

7. Complete cleaning: After the cleaning is completed, the cleaning machine will automatically stop working. At this point, open the drain valve of the cleaning machine to discharge the waste liquid. Then remove the cleaning material and wipe it dry with a clean cloth or tissue until it is completely dry.

8. 清洗机的维护：清洗结束后，要对清洗机进行适当的维护和清洁。清洗机应经常清洗内部管道和过滤器，并定期更换或补充清洗液。

8. Maintenance of the cleaning machine: After cleaning, appropriate maintenance and cleaning should be carried out on the cleaning machine. The cleaning machine should regularly clean the internal pipelines and filters, and regularly replace or supplement the cleaning solution.

以上是标准超声波清洗机的使用方法的一般步骤，具体使用方法可能因不同型号的清洗机而略有差异。使用前请务必仔细阅读清洗机的操作说明书，并根据实际情况进行操作。

The above is a general procedure for the use of the standard Ultrasonic cleaning. The specific use method may vary slightly with different models of the cleaner. Before use, please carefully read the operating manual of the cleaning machine and operate according to the actual situation.