喷淋清洗机设备主要采用不锈钢制造，在一定程度上完全符合食品工业的使用标准。所有精密零件均在加工中心制造。在设计过程中，它是非常合理和非常低的失败。

Spray cleaning machine equipment is mainly made of stainless steel, to a certain extent, fully meet the food industry standards. All precision parts are manufactured in the machining center. In the design process, it is very reasonable and very low failure.

喷淋清洗机设备主要利用设备现场的剪切力和气泡的空化腐蚀进行清洗。在制备过程中，可以有效地利用其特殊的农药洗脱液对物理冲击进行浸泡和回收，有效去除农药残留，达到、清洁、的农产品，全、批量、低成本的效果。

The equipment of spray cleaning machine mainly uses the shear force and cavitation corrosion of bubbles to clean. In the preparation process, it can effectively use its special pesticide eluent to soak and recover the physical impact, effectively remove pesticide residues, and achieve the effect of efficient, clean and safe agricultural products, full, batch and low-cost.

喷淋清洗机设备在一定程度上，主要由除虫装置、气泡发生机构、清洗槽、水过滤循环装置、物料输送装置和清水喷淋装置组成。在实际生产过程中，许多设备可以连接和使用，因此电机的水发生装置可以安装臭氧，设备和材料满足食品出口的卫生要求。

To a certain extent, the equipment of spray cleaning machine is mainly composed of insect removing device, bubble generating mechanism, cleaning tank, water filtering circulating device, material conveying device and water spraying device. In the actual production process, many equipment can be connected and used, so the water generating device of the motor can be installed with ozone, and the equipment and materials can meet the hygienic requirements of food export.

喷淋清洗机设备主要是对枣、蔬菜、水产生产线的重要产品进行清洗。该设备的主要工作是将适量的水有效地投入到箱体的前部，在运行过程中通过加热管加热水，原料将通过箱体，当操作时，它将直接完成轧制状态。气泡机和水，并用网带推进。在水面，高端配备喷头和高压冲洗。

Spray cleaning machine is mainly used to clean the important products of jujube, vegetable and aquatic product production line. The main work of the equipment is to put appropriate amount of water effectively into the front of the box. During the operation, the water is heated through the heating pipe, and the raw material will pass through the box. When it is operated, it will directly complete the rolling state. Bubble machine and water, and with mesh belt propulsion. On the water surface, the high-end is equipped with nozzle and high-pressure flushing.

喷淋清洗机设备的功能特点

Functional characteristics of spray cleaning machine

1。高压喷雾清洗设备的内腔主要由不锈钢制成。耐酸碱，使用寿命长。

1。 The inner cavity of the high-pressure spray cleaning equipment is mainly made of stainless steel. Acid and alkali resistant, long service life.

2。该设备将有效地配备加热和温度自动控制系统，使用其不锈钢加热管即可直接加热。

2。 The equipment will be effectively equipped with heating and temperature automatic control system, which can be directly heated by using its stainless steel heating pipe.

3。采用辊道输送机，工件运转平稳，驱动辊均为不锈钢。

3。 Using roller conveyor, the workpiece runs smoothly, and the driving roller is made of stainless steel.

4。建立液位控制系统，确保机器正常运行。

4。 Establish the liquid level safety control system to ensure the normal operation of the machine.

5。提供循环过滤系统以确保溶液的清洁度。

5。 Provide circulating filtration system to ensure cleanliness of solution.

6。往复移动喷涂可在所有方向清洗工件。

6。 Reciprocating spray can clean the workpiece in all directions.

7。高压喷雾清洗设备有效地利用了扇形陶瓷喷嘴，调节了喷嘴角度，保证了喷嘴的使用寿命。

7。 The high-pressure spray cleaning equipment effectively utilizes fan shaped ceramic nozzles to adjust the nozzle angle and ensure the service life of the nozzles.

8。入口采用橡胶辊和惰轮。进给速度稳定，速度与辊道同步。滚轮与惰轮之间的距离可根据工件的尺寸进行调整。

8。 Rubber roller and idler gear are used at the inlet. The feed speed is stable and the speed is synchronized with the roller table. The distance between the roller and the idler can be adjusted according to the size of the workpiece.

9。高压喷头清洗设备顶部装有吸雾装置，以保证清洁的工作环境。

9。 The top of the high pressure nozzle cleaning equipment is equipped with a mist absorbing device to ensure a clean working environment.

本文由切丝切片机为您提供，我们的网站是:http://www.jnthcsb.com我们将以全心全意的热情为您提供更的服务，欢迎您的访问!

This article is provided by the slicing machine http://www.jnthcsb.com We will provide you with better service with wholehearted enthusiasm. Welcome to visit!

关键词：喷淋清洗机