目前市场上的超声波振荡器主要用于大型水质净化设备和各种超声波清洗设备，在应用超声波后广泛应用于各种工业消耗、精细仪器清洗和家庭生活中，停止溶液搅拌，从而停止对所需项目的清洗和。那么，当我们停止对超声波振子的日常维护时，应该注意哪些成果呢？

What should be paid attention to in the maintenance of ultrasonic oscillator in ultrasonic cleaning machine? At present, the ultrasonic oscillator on the market is mainly used for large-scale water purification equipment and various ultrasonic cleaning equipment. After the application of ultrasonic, it is widely used in various industrial consumption, fine instrument cleaning and family life. Stop the solution mixing, so as to stop the cleaning and disinfection of the required items. So, when we stop the routine maintenance of the ultrasonic vibrator, what results should we pay attention to?

一，侧风口清洁。高评价的超声波振荡器在底部和侧面有一个特殊的喷口，以保证仪器任务中无效的散热，因此超声波振荡器的侧风口能否被清洁，排气和热排放是否被延迟，将间接影响整个仪器的清洗效果和工作性。频繁工作的超声波振荡器应该每两个月清洗一次。

1、 Clean the side air outlet. The highly evaluated ultrasonic oscillator has a special nozzle at the bottom and side to ensure the ineffective heat dissipation in the instrument task. Therefore, whether the side outlet of the ultrasonic oscillator can be cleaned and whether the exhaust and heat emission can be delayed will indirectly affect the cleaning effect and work safety of the whole instrument. Frequent working ultrasonic oscillators should be cleaned every two months.

二，过热维修。为了避免在任务中因过热而损坏仪器部件，质量好的超声波振荡器将在仪器外面安装特殊的过热维护和安装，但如果操作人员发现在使用超声波振荡器的过程中出现异常加热，还应及时关闭电源并对加热原因进行反思，以免因过热维护和安装而对仪器造成损坏。

2、 Overheat repair. In order to avoid damage to the instrument components due to overheating during the task, a high-quality ultrasonic oscillator will be installed outside the instrument for special overheating maintenance and installation. However, if the operator finds abnormal heating in the process of using the ultrasonic oscillator, he should turn off the power in time and reflect on the heating reasons, so as to avoid damage to the instrument due to overheating maintenance and installation.

三，清洗剂清空。当使用超声波振荡器停止清洗物品时，大量的人会加入一定量的酸碱清洗剂以提高清洗效果，但清洗剂在打开很长一段时间后会释放挥发性酸或碱性气体，形成对仪器外部的腐蚀，因此超声波振荡器应在一次性使用后及时清空其外部储存清洗剂。

3、 The cleaning agent is empty. When the ultrasonic oscillator is used to stop cleaning, a large number of people will add a certain amount of acid-base cleaning agent to improve the cleaning effect. However, after the cleaning agent is opened for a long time, it will release volatile acid or alkaline gas, forming corrosion to the outside of the instrument. Therefore, the ultrasonic oscillator should be emptied in time after one-time use.

总之，应注意侧风口的电流停止清洗，注意仪器的过热维护，停止超声波振荡器的日常维护时及时清空清洗剂。超声波振荡器具有良好的售后服务，具有更完善的清洗功能和较好的清洗效果。

In short, we should pay attention to the current of the side tuyere to stop cleaning, pay attention to the overheating maintenance of the instrument, and clear the cleaning agent in time when stopping the routine maintenance of the ultrasonic oscillator. Ultrasonic oscillator has good after-sales service, more perfect cleaning function and better cleaning effect.