1在清洗过程中，要注意很多地方，禁止导电液体（如水）从超声波控制柜顶部的进气口进入。否则会对清洗机的电路系统造成严重损坏。

1. During cleaning, pay attention to many places. Conductive liquid (such as water) is not allowed to enter from the air inlet on the top of the ultrasonic control cabinet. Otherwise, it will cause serious damage to the circuit system of the cleaning machine.

2不使用时，保持机器清洁并关闭电源。

2 keep the machine clean and turn off the power when not in use.

3我们的机器不是耐碰撞的产品，所以在使用时要避免碰撞或剧烈振动。

Our machine is not a collision resistant product, so we should avoid collision or violent vibration when using it.

4我们应该让机器远离高温热源。

We should keep the machine away from high-temperature heat sources.

5同时，我们应该避免把机器放在潮湿的环境中。

At the same time, we should avoid putting the machine in a humid environment.

6机器的连续工作时间不得超过4小时。例如，关闭超声波按钮，让散热器风扇继续工作。当超声波清洗未开始时，应连续冷却超声波控制柜2-3分钟。

6 the continuous working time of the machine shall not exceed 4 hours. For example, turn off the ultrasonic button and let the radiator fan continue to work. When ultrasonic cleaning is not started, the ultrasonic control cabinet shall be continuously cooled for 2-3 minutes.

7对于长时间运行的清洗机，关机前应将电源旋钮调0，工作3-6分钟后关闭风扇，使电源内部热量散失。

7 for the cleaning machine running for a long time, adjust the power knob to 0 before shutdown, and turn off the fan after working for 3-6 minutes to dissipate the heat inside the power supply.

8清洗液应及时沉淀、过滤或更换，确保清洗效果。

8. The cleaning solution shall be precipitated, filtered or replaced in time to ensure the cleaning effect.

以上的信息就是超声波清洗机生产厂家给小编提供的知识分享，更多的精彩内容请点击我们的网站：http://www.jnthcsb.com，我们后续会有更多的内容等您查看

The above information is the knowledge sharing provided by the manufacturer of ultrasonic cleaning machine to Xiaobian. For more wonderful contents, please click our website: http://www.jnthcsb.com , we will have more content for you to check later