Use an explosion-proof high-pressure cleaning machine to clean oil pipelines. Not only is the cleaning efficiency high (the cleaning time for one oil pipe is only about 2 minutes), but the cleaning effect is also very good.

一般情况下，防爆高压清洗机的高压水射流温度可达150℃、压力可达200bar，高温不仅能快速熔化油脂、蜡和油，而且能快速地冲洗熔体。该清洗方法不仅成本低，而且节能环保。这是一种很好的清洗油管的方法。

In general, the high-pressure water jet temperature of explosion-proof high-pressure cleaning machines can reach 150 ℃ and the pressure can reach 200bar. High temperature not only quickly melts grease, wax, and oil, but also quickly washes the melt. This cleaning method not only has low cost, but also is energy-saving and environmentally friendly. This is a good method for cleaning oil pipes.

防爆柱塞泵来维持高压清洗机的高压运行

Explosion-proof plunger pump to maintain high-pressure operation of high-pressure cleaning machine

1、高压泵每次使用后，用清水冲洗软管和喷嘴内的残液，清洗机壳，发现电源线有损坏或压力不足时，应将电源线存放在固定的地方，并标明“待修”，使用前应及时通知维修人员；负责高压泵的维修人员，每天检查一次高压泵的运行情况，并做好记录。

1. After each use of the high-pressure pump, rinse the residual liquid in the hose and nozzle with clean water, and clean the casing. If any damage or insufficient pressure is found to the power cord, it should be stored in a fixed place and marked as "to be repaired". Before use, maintenance personnel should be notified in a timely manner; The maintenance personnel responsible for the high-pressure pump shall inspect the operation of the high-pressure pump once a day and keep records.

2、如发现密封损坏，老化引起泄漏，压力不上升，应及时更换;

2. If the seal is found to be damaged, aging causes leakage, and the pressure does not rise, it should be replaced in a timely manner;

3、每半年检查高压泵电机的电气性能、机械性能、主机和主接触器开关，并增加必要的润滑油，确保设备正常使用和记录；

3. Check the electrical and mechanical performance of the high-pressure pump motor every six months, as well as the switch of the host and main contactor, and add necessary lubricating oil to ensure the normal use and recording of the equipment;

4、定期检查和正确的安全阀释放压力至1.08额定操作压力的1.1倍;

4. Regularly inspect and correctly release the pressure of the safety valve to 1.1 times the rated operating pressure of 1.08;

5、定期检查压力表的精度，定期检查皮带的松紧度，更换损坏的易损件，调整零件间隙，检查并拧紧螺钉；

5. Regularly check the accuracy of the pressure gauge, regularly check the tightness of the belt, replace damaged and vulnerable parts, adjust the gap between parts, and check and tighten screws;

6、高压泵一般应保持一定的油位，如发现润滑油不足应保持在油浸面的六至七分之一，并及时加注，保证设备正常运行；

6. High pressure pumps should generally maintain a certain oil level. If insufficient lubricating oil is found, it should be kept at six to one seventh of the oil immersed surface and promptly filled to ensure the normal operation of the equipment;

7、需要长时间关闭的泵，用清水清洗，泵体内的液体排出，所有阀门被拆除，防锈油被应用，整个泵具有防腐和维护功能。

7. The pump that needs to be shut down for a long time should be cleaned with clean water, the liquid inside the pump body should be discharged, all valves should be removed, anti rust oil should be applied, and the entire pump should have anti-corrosion and maintenance functions.

8、如果你想使泵很长一段时间来处理泵的检查和维修的各个方面，或无法启动。

8. If you want the pump to handle all aspects of pump inspection and maintenance for a long period of time, or if it cannot be started.

有了高压去毛刺清洗机上面的小总结，希望对广大客户有所帮助，如果有什么不理解的或者寻求帮助的请点击我们的网站： http://www.jnthcsb.com或者来电咨询，我们会尽全力为您解决

With the summary on the high-pressure deburring cleaning machine, we hope it can be helpful to our customers. If you have any questions or need help, please click on our website: http://www.jnthcsb.com Or call for consultation, and we will do our best to solve it for you