通过式清洗机洗车顺序

Car washing sequence of walk-through washer

（1）先冲掉泥沙：用高压水枪清洗时，要用高压水枪从上到下将泥沙从车身表面冲掉。然后再清洗车的后部，洗下部。要注意将车轮和制动盘、翼子板和栅网上所沾的泥巴冲洗干净

(1) Flush out the sediment first: when cleaning with the high-pressure water gun, use the high-pressure water gun to flush the sediment from the body surface from top to bottom. Then wash the rear of the car and the lower part. Pay attention to wash the mud on the wheel, brake disc, fender and grille

（2）喷洒洗车液：高压水枪冲洗干净车身之后接下来该给车上液了，将洗车液均匀的泼洒在车身之上，然后用多功能的高压洗车机或者是手工的将洗车液擦拭均匀，不要使用洗衣粉、肥皂等

(2) Spray car wash liquid: After the high-pressure water gun has washed the car body, it is time to spray the car wash liquid evenly on the car body, and then wipe the car wash liquid evenly with a multi-function high-pressure car wash machine or manually, do not use detergent, soap, etc

（3）用洗车海绵擦拭车身：用洗车海绵将车上的洗车液在车身上擦拭一遍，然后使用高压水枪将车冲洗干净。

(3) Wipe the car body with a car wash sponge: wipe the car wash solution on the car body with a car wash sponge, and then wash the car with a high-pressure water gun.

（4）清除污渍：仔细清除车身上还残留的一些污渍，这需要使用除垢水来配合使用。注意：在清除污渍时要沿着与汽车行驶相垂直的方向来擦拭。

(4) Remove stains: carefully remove some remaining stains on the body, which requires the use of descaling water. Note: When removing the stain, wipe it in the direction perpendicular to the driving direction of the car.

（5）将车身水分擦干：将污渍清除完以后用清水将车上的洗车液全部清洗干净。然后将水分擦干，要确保在擦干之后整个车都没有水迹

(5) Wipe the body dry with water: After removing the stains, clean all the car washing liquid on the car with clean water. Then dry the water. Make sure there is no water on the whole car after drying

洗车方法：不脱蜡洗车，即使用高压水枪，配合洗车液，除去车身上的尘土、污垢。

Car washing method: wash the car without dewaxing, that is, use high pressure water gun and car washing liquid to remove dust and dirt on the car body.

此外在通过式清洗机清洗之前，要保持周围环境在0-40℃之间，车身表面温度也要在60℃以下，高压水枪也不要离车身太近，要距离车身15cm以上。更多相关内容就来我们网站http://www.jnthcsb.com咨询！

In addition, before cleaning with the walk-through cleaner, the surrounding environment should be kept between 0-40 ℃, the body surface temperature should also be below 60 ℃, and the high-pressure water gun should not be too close to the body, but more than 15 cm away from the body. Come to our website for more relevant content http://www.jnthcsb.com consulting service