现在市场上超声波清洗机的和种类数不胜数，价格也参差不齐。导致大家在选购机器时不知道购买哪一种的比较好。下面单工位旋转喷淋清洗机生产厂家就教大家三个技巧，挑选的超声波清洗机。

There are numerous brands and types of ultrasonic cleaning machines on the market, and the prices are also uneven. As a result, we don't know which kind of machine is better when we buy it. The manufacturer of single-station rotary spray cleaning machine will teach you three skills to select excellent ultrasonic cleaning machine.

1、看超声频率

1. Look at the ultrasonic frequency

市面上的超声波清洗机，大多数频率在40~50kHz左右，这个频率阶段是非常中庸的频段，符合绝大多数场景的使用。但是正式因为这个频段使用非常多，导致振子(即换能器)的质量不一。而拥有高频(100kHz左右)或者低频(25kHz)频段的超声波清洗机，其振子质量相对较好，尤其某些双频的机器，其振子一定优于单频的机器。所以在选购时，条件允许的话，可以优先选择双频的机器，然后根据被清洗物选择高频还是低频。

Most of the ultrasonic cleaning machines on the market have a frequency of about 40~50kHz. This frequency stage is a very moderate frequency band, which is suitable for most scenarios. However, because this frequency band is widely used, the quality of the vibrator (i.e., the transducer) is different. The vibrator quality of ultrasonic cleaning machine with high frequency (about 100kHz) or low frequency (25kHz) frequency band is relatively good, especially for some dual-frequency machines, the vibrator must be better than single-frequency machines. Therefore, if conditions permit, dual-frequency machines can be selected first, and then high-frequency or low-frequency machines can be selected according to the object to be cleaned.

2、看功率

2. See power

功率越高，清洗效果越好，这是毋庸置疑的。但是过高的功率会对被清洗物有所腐蚀，所以功率太大了也不好。那么应该怎么选择呢?其实部分厂家也考虑到了这一点，所有，有的清洗机设备是可以自行调整超声功率的，1%~99%可调。带有功率可调功能的设备，条件允许的话尽量往大功率的买。

There is no doubt that the higher the power, the better the cleaning effect. However, too high power will corrode the cleaned object, so too high power is not good. So how should we choose? In fact, some manufacturers have also taken this into account. All of them can adjust the ultrasonic power by themselves, with 1%~99% adjustable. For equipment with adjustable power, try to buy high-power equipment if conditions permit.

3、听声音

3. Listen to sound

听声音，是指听设备工作时的声音。理论上来说，超声波是人耳听不到的声音，但是在实际中，超声波清洗机是会发出一定的噪音的，这是由于各种原因造成的。当两款设备，材质基本相同，功率和频率也相同时，哪一个的噪音小，说明质量比较好。原因是：

Listening refers to the sound of the equipment when it is working. In theory, ultrasound is a sound that cannot be heard by human ears, but in practice, ultrasonic cleaning machines will make certain noise, which is caused by various reasons. When the two types of equipment are basically the same in material, power and frequency, which one has less noise indicates better quality. as a result of:

a)振子工作时不是100%处于超声频段的，好的振子处在超声频段的时间较多，噪音就小。

a) When the vibrator works, it is not 100% in the ultrasonic frequency band. A good vibrator spends more time in the ultrasonic frequency band, and the noise is small.

b)噪音小，说明材料之间的密封性好，也就是制造工艺要求比较高，这样的设备更加耐用。

b) Low noise means that the sealing between materials is good, that is, the manufacturing process requirements are relatively high, and such equipment is more durable.

c)说明厂家是真实的为客户着想，这样的厂家在产品和服务上会更好。

c) It shows that the manufacturer is truly considerate of customers, and such manufacturers will be better at products and services.

以上就是给大家简介的选择超声波清洗机主要看中的几点，需要了解更多的详情可来我们网站进行咨询或者直接拨打电话联系我们http://www.jnthcsb.com！

The above are the main points of choosing ultrasonic cleaning machine. For more details, please visit our website or call us directly http://www.jnthcsb.com ！