1、准备清洗液：根据物品的污垢种类选择合适的清洗液，通常使用的清洗液是水或乙醇。需要注意的是，清洗液中应该加入适量的清洗剂，以提高清洗效果。

1. Prepare cleaning solution: Choose a suitable cleaning solution based on the type of dirt on the item, usually using water or ethanol as the cleaning solution. It should be noted that an appropriate amount of cleaning agent should be added to the cleaning solution to improve the cleaning effect.

2、装载物品：将需要清洗的物品放入清洗机的清洗槽中，注意不要将物品堆放在一起，应该尽量分散放置。

2. Loading items: Put the items that need to be cleaned into the cleaning tank of the cleaning machine, being careful not to stack them together, and should be placed as scattered as possible.

3、设置清洗参数：根据清洗液的种类和物品的污垢程度，设置清洗机的超声波功率、清洗时间和清洗温度等参数。需要注意的是，不同种类的物品和不同种类的污垢，其清洗参数也有所不同，应该根据具体情况进行设置。

3. Set cleaning parameters: Based on the type of cleaning solution and the degree of dirt on the item, set parameters such as ultrasonic power, cleaning time, and cleaning temperature of the cleaning machine. It should be noted that the cleaning parameters vary for different types of items and dirt, and should be set according to specific circumstances.

4、开始清洗：按下清洗机的启动按钮，清洗机会自动进行清洗过程。在清洗过程中，可以观察清洗液的状态，如果清洗液变浑或者污垢较多，应该及时更换清洗液。

4. Start cleaning: Press the start button of the cleaning machine, and the cleaning machine will automatically start the cleaning process. During the cleaning process, the condition of the cleaning solution can be observed. If the cleaning solution becomes cloudy or has a lot of dirt, it should be replaced in a timely manner.

5、取出物品：清洗时间到达后，清洗机会自动停止，此时应该将清洗好的物品从清洗槽中取出，然后用清水将物品清洗干净。

5. Removing items: After the cleaning time is up, the cleaning machine will automatically stop. At this time, the cleaned items should be taken out of the cleaning tank and then cleaned with clean water.

本文由超声波清洗机友情奉献.更多有关的知识请点击: http://www.jnthcsb.com 真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from ultrasonic cleaning machines. For more related knowledge, please click: http://www.jnthcsb.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned